silk plaster liquid wallpaper
Instructions for applying of liquid Wallpaper
Application of Liquid Wallpaper:
1. Pour room temperature water into the plastic tub :
For each wall or ceiling surface prepared for application, it’s recommended to knead the number of packs to cover it entirely from corner to corner in one batch.
2.Shake the pack to disperse the mixture inside evenly. Pour out the mixture into the plastic tub and mix well by hand, straining through the fingers to avoid the formation of glue clots. The material is safe for the skin and health.
ATTENTION: We recommend a full kneading an entire pack. It is not for partial use. There are dry glue components stored in the packaging within the mixture. If only partially used, there can be a situation where the glue components are more concentrated in one area of the bag than in another due to storing and transportation. The concentration of glue pieces once kneaded may be not sufficient in the other part of the pack. That's why we only recommend kneading the entire pack.
3.Leave the kneaded batch for the recommended period (12 hours) in order to attain a perfect consistency before applying. For convenient storage use the packaging bag.that the colour mixture is even, as minor colour variations from batch to batch are possible.
Add up to 1 litre of room temperature water per one bag for easier application.
4.Taking small portions, apply the soaked material with the plastic trowel evenly on the surface with a 1-2mm layer. Use the same batch to cover the surface from one corner to another. The plastic trowel must adjoin to the material at an angle of 10-15 degrees, forming a wedge. For an ideal application of SILK PLASTER in 1-2 hours, use light side movements, smooth out the surface with the plastic trowel, soaking it in water from time to time.
The indoor temperature must not fall below +15°C, humidity - normal. The drying time of liquid wallpapers is between 24-48 hours. It depends on the temperature, air circulation and humidity. It is highly recommended to ventilate the room by opening windows and/or turning on the air conditioner.
To avoid any rough surfaces and to achieve an even coverage, please follow the specified material consumption.
Consumption of the material with the thickness of no more than 1.5 mm: