This article provides detailed instructions on how to breed liquid wallpaper - application technology, how to prepare the surface, which tool is best to work with, as well as tips on caring for a decorative coating.
changzhou rucai decorative materials co.,ltd ,In the article, the specialists of our company tried to give exhaustive answers to all questions that may arise when you first get acquainted with the finishing mixtures of TM “Style”. The work with liquid wallpaper described below touches on a number of very important points.
If you don't want to read, watch the video
You can also see how to make drawings with liquid wallpaper
The surface of the walls can be considered ready for application if:
Preparation for the installation of textile wallpapers should be carried out depending on the type of surface.
If you have concrete walls or cement-sand plaster:
Such a wall covering as whitewashing is not found at all in modern apartments in urban new buildings. You can see this material only on the walls of country houses. Wanting to ennoble a country holiday home, buyers are often interested in how to apply liquid wallpaper on whitewash.
Attention: it is impossible to glue finishing mixtures of TM "Style" on whitewash. Before starting work, the coating must be thoroughly washed off, primer applied, start, and after the putty dries, primer again.
Pre-treatment of plasterboard walls is practically no different from plaster. Note: so that after the material dries, the joints do not shine through on the surface, it is necessary to putty not only the joints of drywall sheets, but the entire surface.
changzhou rucai decorative materials co.,ltd Liquid wallpaper on OSB-plate, plywood, wood or metal must be glued to a surface treated with PF-115 alkyd-based enamel. The walls are covered with enamel in a continuous layer to create a waterproof barrier between the surface and the finishing material. After drying, liquid wallpaper is already applied to the paint.
Please note: liquid wallpaper is absolutely safe for health, both dry and diluted!
Liquid wallpaper: preparation of ready-made mixtures of TM "Style". These proportions are calculated for 1 kg of the mixture. How to prepare liquid wallpaper so as not to damage the structure of textile and cellulose fibers? Advice from experienced professionals: to get a truly beautiful and original liquid wallpaper, knead only with your hands. It is not recommended to use a construction mixer in the process.
changzhou rucai decorative materials co.,ltdAs you can see, the preparation of liquid wallpaper takes a little time - 10-15 minutes. However, immediately after diluting the mixture, it cannot be applied to the finishing surface, it is necessary to let the mass brew for at least 8 hours.
Please note: if the storage rules are followed, the finished mixture can be stored at room temperature tightly closed for several days. At the same time, the adhesive properties of the material are preserved.
